Tag Archives: crafts

Oogoo Part 1 – Basic modelling and casting tests

I have been experimenting with oogoo a bit now and again over the past year or so and I thought I would report my experiences with it.

Oogoo is silicone caulk mixed with corn flour. Silicone caulk is activated by the moisture in the air which means it has a very long cure time unless it is used very thinly. Adding cornflour allows the moisture in the air to quickly penetrate the caulk even when it is inches thick resulting in a cure time of between 15 minutes to 2 hours depending on the ratios you use. More corn flour means a faster cure.

There are a lot of benefits to using oogoo instead of mould making silicone.

  • Silicone caulk is very cheap. You can find tubes of it in budget shops for £1 to £2 for 300ml. Corn flour is even less expensive and increases the total volume of your material. Casting silicone can be about £10 for 300ml.
  • Oogoo mixes to create a putty which makes the whole process very easy. You can press the oogoo around your model with your hands and it is pretty safe. Silicone caulk gives off acetic acid as it cures which is relatively harmless.
  • The fact that it is a putty means there is no risk of bubbles.
  • It is possible to hand model oogoo like Plasticine although the fast curing time does make things difficult. I have some examples below.

There are instances where a pourable liquid silicone would be more ideal for mould making. I have experimented with mixing white spirit with the oogoo to make it a liquid to some mixed results, but even when you get it right the resulting mould is probably always going to be too soft to use. I would definitely recommend buying proper mould making silicone if you need to pour it.


 

My first oogoo test was just a hand modelled doodle, and my default shape is generally something with 5 way symmetry. I tried mixing in pigment, and I believe in this case I used a small amount of Indian ink. It set very quickly using a roughly 1:1 ratio of caulk to flour. The centre the pointy bits around the edges and the ring in the centre were added from a second batch, and the ring in the middle was just a sausage bent around into a loop. It set much too quickly so there is a very visible join. I used caulk with no flour as a glue to bind the second batch to the first. The third batch I mixed in some purple acrylic ink to add some simple decoration. It’s not the prettiest thing in the world, but it was mostly about testing the materials.

The result is completely opaque because Indian ink and Acrylic ink are very opaque mediums.

The second thing I tried was some basic casting. I pushed oogoo into some empty Rennies packets to try and get some nice smooth rounded square shapes. I wouldn’t recommend that if you want perfect rounded squares because it was impossible to get out the little dents in the packet no matter how hard you pushed the oogoo in. I experimented with different pigments here again. Yellow food colouring, blue acrylic ink and I think some kind of food colouring that didn’t have very strong pigment on the grey ones.

I arranged them on a sheet of plain oogoo. The result is very floppy. I could see potential here for designs for cosplay outfits, but it would be better to cast the whole thing as one sheet, and to make a really nice hand carved plaster mould rather than empty Rennie packets.

You can see the translucency of the oogoo when I hold it up to the window, and the difference between the opaque purple pigment and the transparent yellow pigment. I think there is potential for creating pieces to be stretched over light boxes.

These weren’t designed to be pretty. It was more just a test of what can be done with oogoo.

I will talk about some more advanced experiments with oogoo that I tried later in my next post.

 

Advertisements
Tagged , , , , , , , , , , , , , , , ,

Blue Stuff

Apologies for being terrible at keeping up with posts. I promise to be much more active from now on.

I’m going to use this space to record some of my thoughts and ideas, as well as link to videos and articles that inspire me rather than just sticking to sharing things that I have made and done. I realised the other day that there are a lot of youtube videos of things that I want to try that I’ve completely forgotten about so it will be useful to keep them here.

I’ve discovered this amazing mouldmaking material called blue stuff, which I can’t wait to try in the future. It’s a very easy to use putty that can be melted again reused over and over again, which is beneficial for so many reasons. Another good thing is that it doesn’t generally stick to the object that you’re taking a mould from, and in it’s soft form it won’t stick to a hardened piece allowing multi part moulds to be created pretty easily.

Here is it in action.

I’m really excited about buying some and trying it with some Milliput Superfine White, which is normally about £4.50 a box but I managed to find some here for around £26 for 10 packets. Milliput Superfine White will apparently mix well with pigments designed for resin and also even works with a small amount of oil paint although there are no videos on Youtube of anybody trying this. I’m considering recording some videos of my own material experiments to put on Youtube because there are quite a lot of things I’ve looked up that don’t exist on there yet.

I will report back when I have tried this stuff out.

Edited to add a link to where you can buy blue stuff. Which is here.

Tagged , , , , , , , , , ,

Paper Lamps

I started working on this mainly because I needed decor for my room, but it could easily feed into my main work. I first wanted to replace the ugly glass ceiling light shade that makes a horrible vibrating noise every time my housemate upstairs moves around, but that ended up being a bit of a disaster. It wasn’t till I started doodling that I came up with some potential workable designs.

01 lamp ideas 1

Led on to me making this

DSCN5047

DSCN5047 DSCN5054

I still need to finish the watercolour work on the white tissue surface.

Since then I’ve been trying to figure out what to do next. I had a go at drawing it out in painter and seeing how other colours might look.

05 triangle light

and then [played around with more designs ideas.

03 lamp ideas 2

I also wanted to try and make a bunch of samples using tissue I put through my home printer by taping it to a regular sheet of paper. When you add the pva water mix to it the image runs but if you are extremely careful you can keep it mostly preserved

.success tissue print

And here is the little model I tried it out on. each surface had an increasingly clearer image as I got used to preventing the wet ink from running.

printed tissue tetra

I knew I was going to try a few more of these in the future so I played around with designs which might incorporate a number of these tetrahedrons into another lamp.

04 lamp ideas 3

The last design reminded me a bit of an xbox controller and made me think of potentially making an abstract wall piece based on video game controllers. A kind of impractical monstrosity that might work as a piece of art in a gallery space.

Tagged , , , , , , , , , , , , , , , , , , , , , ,

Reflections on the Brief (A fair amount of rambling)

After steaming ahead with various research strands and coming up with lots of final pieces in my head (that I should probably draw in my sketchbook rather than letting them disappear into the void), I felt that despite having these ideas and piece designs that the research backing them up wasn’t really full enough. If I wasn’t on a degree course I would just crack on and make the pieces but being on a degree I have to work in a way that gets me marks.

I have gone back and re-read the brief. The starting point it suggests is “We would like you to produce a critical journal over the summer that not only locates you in the broader historical and cultural world but also explains the journey you have taken whilst you research.”

Locating myself in the broader historical and cultural world is quite difficult. I like some of everything. I like animation (Anything so long as it’s creative. I tend to like stuff that’s either technically amazing or visually distinct. I prefer 2d animation to stop motion or CGI), video games (Any genre so long as it’s interesting and distinct, from big budget AAA titles to the poorest of indie developers working out of their bedroom), quirky atmospheric music (Film scores, jazz, klezmer, folk, rock, prog, funk, electro, blues, soul, grunge, trip hop, avant garde and probably lots of stuff that doesn’t fit into any of those genres). I’m vegetarian and care about animal rights. Politically left wing, although probably more centre left in some ways. I don’t get out very much so in terms of my actual life due to social anxiety issues and depression so I’m largely a single, bedroom dwelling person. Is that a part of the broader cultural world? I guess bedroom dwelling media sponge is me. Maybe that can be a new subculture.

In terms of my practice it’s probably more difficult. I’m a huge fan of just black line on white paper, drawn with a pen. One of my strands of exploration involved using very small, simple line drawings with gel pens to create frame by frame animations with very little planning and no measuring at all. I love doodling and I still think my animation work is the strongest work I have ever done, although I can’t really follow it through without 3d elements for this course which means I can’t do the animation I enjoy so it’s maybe not worth categorizing myself based on that aspect of my practice.

I really like abstract painting and sculpture. I am aware that this is a HUGE proportion of all art that exists. I think more specifically I like work that is self contained and that one can get a lot from without knowing about the history or culture of where I’m from or my background or trying to find political implications within it. Anish Kapoor is a great example of someone like that. He makes things that he wants to exist, and they are self contained objects which are just about themselves, and to an extent the area around them. They are about colour and form.

According to my tutors I have a thing for surface pattern, although I think it’s more of a by product of my actual interest. I have a thing for creating objects entirely, and covering the surface completely allows me to make the object look exactly how I want it to without having to be too limited by the qualities of the building material. The fact that surface pattern is sometimes necessary to achieve that is just the by product of wanting to create interesting objects.

Work by Anish Kapoor

From what I’ve seen in the world of animation, I don’t think I fit anywhere. I have my own completely unique thing that is literally Benjamin Scott-Pye. I suspect that this probably isn’t the case but after years of searching I’m yet to find anything genuinely relevant.

When I started on Contemporary Craft I had just discovered Alan Shields and I was really excited about the prospect of building structures and coating them in cotton pulp. This is something that I definitely want to explore when I go back now I have some creative freedom. From what i can gather it’s a technique most relevant to paper making and since looking into it I have found that paper can be cast into plaster moulds in various different ways, as well as being able to use many objects as armatures, both found and handmade.

My favourite piece by Alan Shields, “Headline Bus Driver” Cotton pulp on steel

The problem I have then, is that I have a lot of things that I want to experiment with to learn about the properties of how materials interact with each other and what works visually and what doesn’t, but not much in the way of a driving concept. On top of that I’m not really sure how much concept is necessary. If I were to just dive in exploring these materials with no concept, would I lose marks for lack of a concept. If I do focus on a concept, will it lead me away from being able to explore these materials I’m so excited about, and will it be a waste of time anyway if it turns out not to be so important for my marks?

“Stepwell” by Alan Shields 2000

Tagged , , , , , , , , , , ,

First painting ideas

Image

Some painting composition ideas based on elements from the sculpture I am working on

Image

This is the final concept art for my sculpture, with some added lines in photoshop adding a little more detail. Below is it without those lines.

Image

Tagged , , , , , , , , ,

Creative constraints, Pondering the past

This is actually from an old blog but I thought it was an interesting to read after a year and a half, purely to remind me of why this year hasn’t worked particularly well for me in terms of work, but also that next year I intend to produce the most awesome and fantastic pieces of artwork of my life, having been given some genuine creative freedom. I was so much more driven and passionate my work back then.

Blogspot: Monday, 8 August 2011 (Includes images of my working process from 2011)

“When attempting to start a new project I usually start with random marks, or a work a very vague concept without too much care and just see what happens. After a few of these I reflect on what I’ve done and see if I can find anything in those images worth running with. The concept tends to change and refine very quickly as I go. I don’t like the concept to restrain the work.”

When I’m finally allowed to work how I work, all will be well with the world.

Tagged , , , , , , ,